Welcome, Guest
Username: Password: Remember me
  • Page:
  • 1

TOPIC:

Re: steve's dragon 12 Dec 2013 23:23 #744

Yes, the plies on the material I have run inboard/outboard and the plans call for it to be cut with the grain running spanwise



From: Kenny <This email address is being protected from spambots. You need JavaScript enabled to view it.>
To: This email address is being protected from spambots. You need JavaScript enabled to view it.
Sent: Monday, July 4, 2011 10:18 PM
Subject: [Carbondragonbuildersandpilots] Re: steve's dragon



I'm starting to run some numbers. can someone confirm that the L direction (top on bottom ply direction of the plywood) of the plywood runs inboard/outboard? Thanks

--- In This email address is being protected from spambots. You need JavaScript enabled to view it., russell wilson wrote:
>
> hi kenny
>
> .8 ply 100mm by 100mm.... .6 carbon epoxy 100mm by 100 mm
>
> what is the weight diference?or what are the densities for each?
>
> russ.

Please Log in to join the conversation.

  • Page:
  • 1